ANTPAK DC10 ULTIMATE PACK includes
- 1 X DC10 Portable Battery Box
- 1 X ANTPAK quick release mounting bracket kit
- Introduction Offer Ultimate Kit New 2018 ANTPAK DC10 model
- On/Off Master Switch to prevent battery power loss
- LED Display with Battery Voltage Information.
- Free quick release mounting bracket kit
- Jump start battery via big currant terminals
The internal size of the battery box is 330mm(L) X 220mm(W) X 250MM (H)
The outside size is 400mm(L) X 250mm (W) X 315mm (H)
- DC loads: 2×2.1A USB Charger,
- 2x Cigarette Socket
- 1x Merit socket,
- 1 x Anderson Plug
- Suits batteries up to 130AH**BATTERY NOT INCLUDED
- If you have existing isolator or battery management system, please plug in Anderson Plug
Whether you need portable power on the work site or a second battery to run the fridge, ANTPAK battery box is the perfect solution. The ANTPAK DC10 provides 12V power. Enjoy portable power anywhere & anytime with our newest technology ANTPAK DC10 Powered Battery Box.
The ANTPAK DC10 is compatible with all 4WD batteries, including lead acid, calcium, gel and AGM of up to 130Ah in size. For those wishing to relocate their battery or even run a second battery, in four wheel drives or caravans for example, the ANTPAK DC10 12V Battery Box with massive external terminals provides a very simple and safe solution for batteries that are not in their original location. The battery can stay contained in the sealed plastic container even when it is required to be disconnected; not only are external terminals supplied on the box for easy connection. Additionally, all DC socket provides yet another power supply for within the vehicle. Don’t forget 2x 2.1A 5V USB Power Sockets, just plug in two iPad or tablets to charge same time.
Thanks to the 50A automatic reset circuit breaker, that protects the accessory and merit sockets, you can charge your sensitive items like mobile phones and laptops without any problems.
For more information about ANTPAK DC10, please check from ANTENERGY website here
|Model name||ANTPAK DC-10|
|Maximum Solar panel Capacity||≤300W solar panel with 18V(carrying idler 21.5V)|
|Output voltage – DC output||
12V power*2PCS， max output current：20A；12V cigar lighter*2PCS，max output current：20A;
(12V power*1PCS+12V lighter*2PCS，2PCS total max current is 20A）；
USB 5V*2PCS， max output current：4.2A；
50A Anderson plug*1PC,max output current：12V/50A
|Internal battery||60AH-MAX130AH， lead acid AGM GEL battery|
|Charge time||Depends on the charge method|
|Discharge time||Depends on the power of loads|
|Over-load、short protect||10ms respond|
***battery box specs according to actual model.
Frequently Asked Questions
- What batteries can be used?
- The ANTPAK can charge most types of rechargeable 12V lead-acid type battery from 60 Ahr capacity up to 140Ahr. There are four main types of 12V lead acid battery – conventional wet lead-acid battery, calcium, AGM and gel. The ANTPAK can charge both cold cranking type car batteries and deep cycle batteries.
- Is it waterproof?
- No, care should be taken to shield it from direct sunlight and the elements.